Liquid, transparent and slightly yellowish product to prevent dust formation in hot water sealing of anodized aluminum. With it, the sealing time can be reduced to 2 minutes per micron without loss of quality.

Product that provides a reservoir with very good adhesion on aluminum and its alloys. Furthermore, it can be used perfectly for chemical deposition of nickel and hard chrome aluminum and aluminum-silicon alloys.

Colourless gas with a wide range of applications. Used to make fertilisers, fibres, plastics and cleaning products, among others.

Substance that breaks down when heated strongly, producing toxic, corrosive fumes and ammonia vapours, nitrogen oxides and sulphur oxides.

Used as a catalyst in polymer chemistry, as a copper-etching agent on electronic circuits, as an oxidisation improver in cosmetic formulas and as a polymerisation initiator and gel breaker in secondary oil recovery systems.

Liquid degreasing additive used in phosphatisation facilities. Formulated with specific surfactants and solvents that allow a high grade of cleaning on metal surfaces, at temperatures of 20-40ºC. Formerly known as Synergic T-125.

Powder product, with medium akalinity. containing plyphosphates, silicates and wetting agents. It is mainly used in surface treatment industries for the spray cleaning of steel, iron, aluminium and non-ferrous metal parts. Formerly known as SAXIN.

Degreasing agent in powder form. It contains no silicates, has low alkalinity and is used as a previous degreasing process, without the material having to be stripped. It is recommended for materials with little grease. Formerly known as RIDOLINE C-1511.

Neutral liquid product, highly soluble in water, which is used with caustic soda to prepare chemical aluminium and aluminium alloy baths. Formerly known as ALMECO 46.

Viscous, clear, colourless, inorganic, slightly alkaline liquid, specially designed for removing grease from all types of fine metals and all kinds of ground parts or profiles with high reflectance finishes. Formerly known as NOVACLEAN AL 101.

Virtually neutral liquid, nitrite-free and with excellent antioxidant properties. Its formulation is especially designed for degreasing machined parts, and it is applied by spraying. Formerly known as NEUTRAPÓN 175.

Nickel-free seal for the treatment of anodized pieces. Formerly known as ALMECO SEAL NG85.

Liquid used to form iron phosphate conversion coatings on steel surfaces. Formulated for use by spraying, resulting in clean surfaces, coated with an even phosphated layer in a characteristic bluish colour. Formerly known as NOVAPHOS F-40.

Liquid used to form conversion coatings on steel, aluminium and galvanised surfaces. Mainly applied by spraying. Formerly known as NOVAPHOS F-50-T.

Also known as sodium hydroxide, and used to make paper, textiles and detergents. Also used in the oil industry to prepare water-based perforation sludge and in household use to unblock drainage pipes in kitchens and bathrooms, among other uses.

Sodium aluminion fluoride, used mainly as a flux for the electrolytic production of aluminium; it can be used to reduce the melting point of aluminum. Also used as a filling for abrasive agglomerates and for coatings in friction materials, and in glass and enamels.

Chemical compound with high dissolution power. miscible with a wide range of solvents. Its main uses are in the cleaning industry, as a metal degreaser, industrial paint stripper, in manufacturing pharmaceuticals, in the textile industry and in the chemical process industry. Its commercial  name is methyl chloride.

Also known as sodium hydroxide, and used to make paper, textiles and detergents. Also used in the oil industry to prepare water-based perforation sludge and in household use to unblock drainage pipes in kitchens and bathrooms, among other uses.

Water whose composition is based on the binding of H2O molecules subjected to to a purifying process, eliminating micro-organisms, mineral salts and other foreign substances from the water.

Used for chemical analysis and for manufacturing detergents, among many other uses.

Crystalline powder obtained by mixing quicklime with water.

Chemical compound known to be a strong oxidising agent.

At room temperature, it takes the form of a colourless liquid with a bitter taste. It has many applications; at low concentrations (3% - 9%) it is found in a large number of household products for medicinal uses, such as in bleaches for fabrics and hair.

In industry, it is used at higher concentrations to whiten fabrics and paper pulp, and to manufacture rubber foam and organic chemical substances. In other areas such as research, it is used to measure the activity of certain enzymes, such as catalase.

Greenish, slightly acid liquid  used to seal the aluminium oxide layer through a chemical reaction that incorporates metals into the cells.

Inorganic acid used as a strong oxidising agent, obtained by mixing dinitrogen pentoxide with water, which has the form of a viscous, colourless, odourless liquid.

Inorganic acid used in the textile, building and surface treatment  industries and in apiculture, among others.

Inorganic acid that can be used as a food additive, fertiliser product, detergent and for treating water, among other uses.

Used in many different fields, such as chloroalkaline electrolysis, inorganic potassium compounds, zeolites, colorants and pigments, titanium dioxide, and in the enamel and glass industry.

Organic dye for aluminum.

Colorant for the galvanising industry that produces light and dark tones.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Product indicated for colouring a wide range of articles. Produces light to deep golden tones.

Universal colorant used for different purposes, and also in architecture (sealing test colorant).

Corncob sawdust with different grain sizes used to dry parts, among other uses.

Product used in the galvanising industry.

Product for cleaning and degreasing metal parts, using the dipping method.

Used in alumium metallurgy to produce abrasives, weld agents and in the chemical industry.

Chemical compound with  many industrial uses. Used  for manufactuing paper, textiles, dyes, oil, chemicals, metallurgy, building materials and for ph regulation and in the food industry as an additive.

Inorganic compound with many industrial uses. Also known as sodium pyrosulphite or sodium bisulphite.

Greenish, slightly acid powder with reddish particles,  used to seal the aluminium oxide layer through a chemical reaction that incorporates metals into the cells.

Inorganic acid used to make fertilisers, and in the synthesis of other acids and sulphates in the petrochemical industry.

Ph regulator and texturiser used in the food industry.

Used for galvanising and as a chemical reagent.