Liquid, transparent and slightly yellowish product to prevent dust formation in hot water sealing of anodized aluminum. With it, the sealing time can be reduced to 2 minutes per micron without loss of quality.

Product that provides a reservoir with very good adhesion on aluminum and its alloys. Furthermore, it can be used perfectly for chemical deposition of nickel and hard chrome aluminum and aluminum-silicon alloys.

Anti-foam product based on glycols and surfactants.

Neutral product used to strengthen cleaning power in sprayed degreasing agents. Formerly known as T-5130.

Wetting - detergent product used as an additive in acid degreasing baths (amorphous phosphatation) applied by spraying. Added to degreasing baths to achieve better cleaning in the material, reduce the treatment time and improve wettability. Formerly known as RIDOSOL 54 / E.

Liquid degreasing additive used in phosphatisation facilities. Formulated with specific surfactants and solvents that allow a high grade of cleaning on metal surfaces, at temperatures of 20-40ºC. Formerly known as Synergic T-125.

Powder product, with medium akalinity. containing plyphosphates, silicates and wetting agents. It is mainly used in surface treatment industries for the spray cleaning of steel, iron, aluminium and non-ferrous metal parts. Formerly known as SAXIN.

Degreasing agent in powder form. It contains no silicates, has low alkalinity and is used as a previous degreasing process, without the material having to be stripped. It is recommended for materials with little grease. Formerly known as RIDOLINE C-1511.

Extremely alkaline product used to remove grease from ferrous materials using the dipping method. The product is extremely effective and elminates the majority of existing greases and dirt. Formerly known as RIDOLINE 31E.

Neutral liquid product, highly soluble in water, which is used with caustic soda to prepare chemical aluminium and aluminium alloy baths. Formerly known as ALMECO 46.

Strongly alkaline powder product, with a high wetting content, easily soluble in water and with high surfactant power. Used for degreasing iron, steel and copper applying the dipping method, before electroplating and also for degreasing sheet metal before enamelling. Formerly known as EMALAN 5654.

Viscous, clear, colourless, inorganic, slightly alkaline liquid, specially designed for removing grease from all types of fine metals and all kinds of ground parts or profiles with high reflectance finishes. Formerly known as NOVACLEAN AL 101.

Alkaline degreasing agent in a solid granular form, white in colour and completely soluble in water, used for cleaning all types of metals. Formerly known as NOVACLEAN 909.

Caustic, yellowish-coloured liquid used for regular maintenance of cleaning, phosophatisation and other similar facilities. Formulated to eliminate ingrained dirt, particularly organic incrusted dirt. Formerly known as NOVACLEAN EC.

Solid product, with a whitish colour, completely soluble in water and specially formulated to treat steel parts. Formerly known as NOVACLEAN P-EC/2.

Strongly alkaline powder product used for degreasing, electrolytic deoxidation and cleaning very greasy parts, using the dipping or spraying method. Formerly known as T-340.

Product used to clean synthetic floors, waterproofed or tiled floors, applied by hand or with polishing machines. Also used for manual cleaning of all kinds of surfaces, for instance, in machine cleaning and maintenance operations. Formerly known as P3-T-7205.

Acid, yellowish, inorganic liquid used to remove incrustations from and deoxidate all types of materials. Formerly known as NOVOX D.

Virtually neutral liquid, nitrite-free and with excellent antioxidant properties. Its formulation is especially designed for degreasing machined parts, and it is applied by spraying. Formerly known as NEUTRAPÓN 175.

Nickel-free seal for the treatment of anodized pieces. Formerly known as ALMECO SEAL NG85.

Liquid used to form amorphous conversion coatings with high weights on steel surfaces, formulated for spray application, to obtain high coating weights. Formerly known as Duridine G 3649 L.

Liquid used to form iron phosphate conversion coatings on steel surfaces. Formulated for use by spraying, resulting in clean surfaces, coated with an even phosphated layer in a characteristic bluish colour. Formerly known as NOVAPHOS F-40.

Liquid used to form conversion coatings on steel, aluminium and galvanised surfaces. Mainly applied by spraying. Formerly known as NOVAPHOS F-50-T.

New product for pretreating ferrous metals, aluminium, zinc and alloys thereof. Creates a conversion coating to improve the adherence of subsequent coatings, such as powder and liquid paints or cathaforesis processes. Presented as an alternative to traditional phospho-degreasing methods, improving the protection of the painted material from corrosion, and drastically reducing the phosophate concentration. Formerly known as Bonderite CC 42.

Acid, chromium-free  liquid used for dipping or spraying as a final rinse for reducing filiform corrosion and improving paint adherence. Formerly known as DEOXILITE 54 / NC.

Non-foaming liquid, hydrochloric acid inhibitor, specially designed for use before electroplating and phosphatisation. Formerly known as Rodine 50.

Univerfsal non-foaming agent used in paint flocculation processes in which foam is formed. Formerly known as CRONISOL 672.

Producte líquid, orgànic, que conté substàncies detergents i una gran proporció de emulgents i compostos antioxidants. Used for cleaning and passivation of ferrous and non-ferrous metal parts in spraying facilities. Formerly known as EMULPON 6788.

Stabilized mixtures for pickling and shine copper and brass acids.

Product used in the surface treatment industry.

Fast drying varnish when touched and colorless.

Additive for use in alkaline zinc baths.

Anode indicated for acid copper baths.

Yellowish, aromatic liquid based on authorised solvents, activators and wetting agents. Specially designed to eliminate polyester from aluminium and also used to eliminate all types of lacquers, paints and epoxy, epoxy-polyester and polyester resins.

Salt for adding to electrolyte chromium baths, with a catalyst incorporated.

Nickel electroplating process with excellent levelling properties, great shine and ductility and with extraordinary penetration power in low current density areas.

Detergent and deoxidant, its formulation gives it high deincrustation power and solubilises organic residue and mineral salts. Leave a metal phosphate film on metal that protects the part from subsequent attacks. Used to eliminate incrustations and organic or inorganc sediments that are resistant to treatment with alkaline products. Can also be used in all types of facilities (steel, aluminium, copper and alloys thereof, etc.) in industry.

Strongly acid liquid, specially designed to eliminate silver from nickel-plated surfaces or other metals, using the dipping method.

Desmetal L (liquid) is designed to eliminate nickel deposits from brass or copper surfaces.

Powder product, water-soluble, designed to eliminate nickel coatings from iron or steel. It works with sodium cyanide, without attacking the base metal, even if the parts remain longer than necessary in the nickel-removing solution.

Chemical metal remover (dipping method) that eliminates all electrolytic deposits from any bath (except chromium) that could exist in the clamps of a frame.

Product used in the surface treatment industry.

Product used in the surface treatment industry.

Item for polishing metals.

Solid product in a granular form with a yellowish colour, formed by a homogeneous mixture of organic salts and compounds designed to carry out previous preparation and electrolytic degreasing.

Strongly alkaline product that contains non-ionic complexants and surfactants, developed to remove dirt from the pores of degreasing material, activating and preparing for the correct subsequent metal plating.

Granular product, white in colour, with low alkalinity and high polyphosphate and complexant content. Eliminates all manner of oils and greases, guaranteeing complete cleaning without attacking the base metal.

Granular product, yellowish in colour, with low alkalinity, characterised by its high complexant and surfactant content, which guarantees complete cleaning without attacking the metal. Designed as an electrolytic degreaser in sprayed nickel facilities.

Anode indicated for acid copper baths.

Alkaline detergent for disposal of mineral oils and fats of vegetable or animal origin.

Alkaline salts for bluing hot iron.

Auxiliariary elements for use in industry and laboratories.

Product designed to work with our OXIBRASS AR-40 product.

Chemical used for industrial surface treatments.

Hydrochloric acid additive that functions as a corrosion inhibitor.

The Primus BL process consists of a copper acid bath with a sulphur base. It is suitable for metallising plastics, steel, Zamak (after the appropriate pretreatment) and brass parts.

Product used in the surface treatment industry.

Additive for nickel frame baths which considerably improves the levelling effect and penetration power.

Greenish, slightly acid liquid  used to seal the aluminium oxide layer through a chemical reaction that incorporates metals into the cells.

Product used in the surface treatment industry.

Product used in the galvanising industry.

Product used in the galvanising industry.

Alkaline, granular, white product used for electrolytic degreasing before galvanic coating processes.

Acid liquid for degreasing and conditioning surfaces before painting. Designed to obtain good degreasing and form a light conversion film on the treated surfaces to protect them from rust.

Product used in the surface treatment industry.

Product designed to provoke the chemical oxidation of brass, copper or bronze.

Dark red liquid supplied in a concentrated form, designed to oxidise silver. It causes the film on silver to easily disappear after scraping. Ideal for costume jewellery, buttons and all types of pieces that need an Antique Silver appearance, in general.

Clear, acid liquid which gives a decorative bluish colour to tin deposits by means of a dipping process.

Auxiliariary elements for use in industry and laboratories.

Weakly alkaline fluid that gives temporary protection to the silver or to silver pieces.

Passivation produces a black film on zinc deposits.

Product containing hexavalent chromium ions and fluorine ions, in the form of salts, which make it possible to obtain bluish colours on zinc deposits.

Neutral, chromium-free  solution which when added to the last cleaning process, prevents the formation of rust and stains on copper and its alloys. Parts treated with "MS" brass passivation maintain an impeccable appearance during storage.

Yellow-green iridescent chromate for zinc deposits.

Solution which gives excellent protection from corrosion in articles dipped in cyanide zinc, cyanide-free alkaline zinc and zinc acid baths. This passivation allows a jet black colour to be obtained.

Product used in the surface treatment industry.

A polishing additive suitable for cyanide zinc baths for pump or static application.

Product used in the Primus BL process. It is suitable for metallising plastics, steel, Zamak (after the appropriate pretreatment) and brass parts.

This polisher is slightly acid and contains no ammonium. It has the following advantages: ecellent levelling power, good metallic dispersion, suitable for application with a drum frame and contains no complexants.

Product used in the PRIMUS EX 200 process, consisting of an acid copper bath that produced brilliant deposits with high levelling power and excellent penetration. This process can be applied with a drum frame and using air or mechanical stirring and is suitable for metallising plastics and metal parts.

Organic polisher recommended for nickel plating iron and steel and copper and its alloys. Gives an excellent shine and has high penetration power in a wide range of current densities.

Solid additive to wear brass parts to vibrate. Polishes stainless steel balls when darken after several operations burnishing.

Organic dye for aluminum.

Colorant for the galvanising industry that produces light and dark tones.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Organic dye for aluminum.

Product indicated for colouring a wide range of articles. Produces light to deep golden tones.

Universal colorant used for different purposes, and also in architecture (sealing test colorant).

Corncob sawdust with different grain sizes used to dry parts, among other uses.

Product used in the galvanising industry.

Product used in the galvanising industry.

Product for cleaning and degreasing metal parts, using the dipping method.

Product used in the surface treatment industry.

Greenish, slightly acid powder with reddish particles,  used to seal the aluminium oxide layer through a chemical reaction that incorporates metals into the cells.

Metal polishing article.

Industrial accessory used for surface treatments.

Product indicated for nickel-plating of iron and steel and copper and its alloys, in  particular by spraying, providing an excellent shine and considerable penetration power.

Product adapted for the passivation of zinc-coated parts in zinc acid baths, baths with a low cyanide content and cyanide-free alkaline baths. Parts submitted to passivation have a bright blue appearance, with no iridescence and excellent resistance to corrosion.

Product used in the galvanising industry.

Process applied to Zamak material to obtain tones ranging from light grey to jet black, depending on the working conditions of the solution.

Product used for galvanising steel.

Metal used to galvanise steel, i.e., to protect it from corrosion. For manufacturing brass and other zine-based alloys, mainly in the pressure modelling sector. Also used for making composites, for instance in zinc oxide and zinc sulphate, and in zinc plate used for tiles, gutters and drainpipes.